X
IT EN
The stick curtain walling system consists of a bespoke aluminium grid of vertical elements (mullions) and horizontal elements (transoms). These mullion profiles are fixed back to the building structure (beam or slab) and then glass, spandrel or ventilated cladding elements are inserted in the grid on site. Mullions and transoms are manufactured from extruded aluminium bespoke profiles, cut and fabricated in the factory, while the grid is assembled and fixed to the structure on site.
More info

GRID AND PANEL CURTAIN WALLING

The grid and panel curtain walling system allows a certain amount of factory pre-assembling activities of the cassette panels to be inserted into the grid. Prefabricated frames with glazed, metal or stone panels are structurally silicone bonded onto carrier frame in the factory and fixed into the aluminium grid on site.
More info

CAPPED SYSTEM CURTAIN WALLING

The glazed element are fixed to the grid by means of continuous aluminium pressure plate profiles screw fixed to the body of the mullions and transoms. These pressure plates complete with gaskets, retain the glass or spandrel panels into the aluminium grid. The pressure on the gaskets creating a seal against the weather. Extruded cap profiles can be bespoke designed to meet the specific design intent of the architect.
More info

STICK TOGGLE SYSTEM

The glazed elements are fixed to the grid by means of toggles, applying pressure to the inner pane, thus creating a seal between the gaskets. The aesthetic appearance is similar to a SSG façade, with no visible external profiles.
More info

DRAWINGS

\"\"

3D

INSTALLATION

Video